|
Ancillary Products
|
|
|
SB - Support Bracket
The 2006 revision of BS 5268-3 extends the range of standard bracing solutions contained in its Annex-A to cover roof spans up to 17m. The bracing solutions for the longer spans involve the use of 47x220 timber this describes a steel support bracket that may be used to form the connection between the timber shelves and the adjacent trussed rafters in accordance with the Annex-A of BS 5268-3:2006.
|
|
SB Datasheet
|
|
|
|
|
|
|
|
|
|
NP - Nail Plate
The NP allows the connection of timber joints by using perforated plates on each face of the joint, nailed together through the jointed timber.
|
|
NP Datasheet
|
|
|
|
|
|
|
|
|
|
CS - Coil Strapping
A versatile multi-purpose fixing strip that is ideal for general strapping on site.
|
|
CS Datasheet
|
|
|
|
|
|
|
|
|
|
UZ-Clip - Nogging Support
The Universal Z-Clip is a multi-functional connector designed to locate and connect flat noggings between I-Joists at perimeter edges to support flooring or non-load bearing partitions.
|
|
UZ-Clip Datasheet
|
|
|
|
|
|
|
|
|
|
WBR - Window Bracket
The Window Bracket attaches window board to masonry wall. WBR available in one size (100x200mm).
|
|
WBR Datasheet
|
|
|
|
|
|
|
|
|
|
TJS - Herringbone Joist Strut
The TJS provides lateral support for floor joists and offers a simple, robust strut in three standard sizes to accommodate popular joist centres, 400, 450 and 600mm respectively.
|
|
TJS Datasheet
|
|
 Download our 2009Technical Guide as a pdf click here
(you must be registered user, click here to register).
|
|
 Free Adobe Reader is required to open the pdfs.
You can download it here.
|
|
|
