|
Restraint Straps
|
|
Restraint Requirements
Lateral Restraint to Masonry Walls.
|
|
Restraint Requirements Datasheet
|
|
|
|
|
|
|
|
|
PFS -Pre-Formed Strap
The PFS is a single piece, 1.5mm galvanised steel strap, designed to provide enhanced performance and greater flexibility of use. It exceeds the performance of the traditional 30 x 5mm lateral restraint strap.
|
|
PFS Datasheet
|
|
|
|
|
|
|
|
|
|
VRS - Vertical Restraint Strap
The VRS is a single piece strap, that provides a convenient and secure method of fixing wallplates to timber and masonry walls.
|
|
VRS Datasheet
|
|
|
|
|
|
|
 |
|
Traditional Restraint Strap (30x2.5 and 30x5)
The traditional means of wallpllate restraint, a pre-bent 30 x 2.5mm (or x 5mm) multi-holed strap. The S-900-100 (30x2.5) will provide all the restraint required when fixed in accordance with schedule.
|
|
Traditional Restraint Strap Datasheet
|
|
|
|
|
|
|
|
|
RST - Restraint Strap
The RST is a high performance restraint strap which is used to resist uplift to trusses connected to masonry and timber frame walls in circumstances of exceptionally high wind loadings. The RST can be used independently or in addition to conventional restraint fixings, such as truss clips and framing anchors.
|
|
RST Datasheet
|
|
|
|
|
|
|
|
|
|
PS - Parallel Strap Range
The Parallel Strap provides required parallel restraint to block work for joist hangers and, where required, build-in details.
|
|
PS Datasheet
|
|
|
|
|
|
|
|
 Download our 2009 Technical Guide as a pdf click here
(you must be registered user, click here to register).
|
|
 Free Adobe Reader is required to open the pdfs. You can download it here.
|
|
|
