KM - Mini Hanger

The KM hanger offers a compact, economical connector. The innovative strengthening points incorporated in the design, transfer loading directly to the fixings, ensuring enhanced performance whilst minimising deflection.

KM Datasheet

TM - Midi Shoe

The TM is offered as an even more economical alternative to our standard truss shoe where lower loading situations arise.

TM Datasheet

KH - Kwiki Hanger

The KH provides a quick and simple solution for various timber-timber connections.

KH Datasheet

KHL - Kwiki Hangers Long Leg

The KHL joist hanger is an extended leg version of the KH hanger. It provides a quick and simple solution for the deeper timber-timber applications, such as loft conversions, supporting deeper floor joists, purlin connections and "Dropped" or "Underslung" floor support.

KHL Datasheet

TS - Truss Shoe

The TS is designed to support trussed rafters from primary girders. It provides a safe and economical connection. Maximum gap allowed 3mm.

TS Datasheet

MTH - Medium Truss Hanger

The Medium Truss Hanger (MTH) is designed to support trusses connecting to girders. It provides a safe and economical connection, allowing design loading to be efficiently transferred without local over stressing. The high performance nail configuration minimises any direct deflection or rotation caused by the incoming truss.

MTH Datasheet

MH - Multi Hangers

The MH hanger is designed to support timber-timber connections in situations of medium to high loading.

MH Datasheet

MTH-L/R - Medium Truss Hanger Left & Right

The MTH-L/R offers great ease and flexibility of installation. It is the perfect connection when members' sizes are not standard, from 38mm.

MTH-L/R Datasheet

RHS / RHD - Ridge Hip Single / Double

The RHS is used for left and right ridges. Its unique design allows it to carry single or multiple trusses.

RHS / RHD Datasheet

CBH - Concealed Beam Hangers

The CBH hangers offers a beam to beam or beam to post connection in medium to high load situations requiring a discrete connection for exposed beams. The CBH is welded for a very robust connection.

CBH Datasheet

HMH - Heavy Multi Hanger

It is not always possible to attach incoming multiple trusses to a vertical web member of a supporting girder. For instance where this is the case specify the HMH.

HMH Datasheet

MDG - Medium Duty Girder Hanger

The MDG is a girder to girder connector for medium load applications. It must be fitted to a suitable vertical web member.

MDG Datasheet

HGG / VHGG - Girder to Girder Hangers

A lightweight yet high performance product which accommodates various incoming girder widths. The adoption of this semi-standard concept will help eliminate costly bespoke design charges.

HGG / VHGG Datasheet

AB-50-50 - Angle Bracket 50x50

The AB-50-50 unique design allows it to accommodate most 90º situations whilst offering an economical solution due to its 0.9mm thickness.

AB-50-50 Datasheet

ABR / LAB - Angle Brackets

The Angle Brackets can accommodate most situations which require connectors at 90º.

ABR / LAB Datasheet

FTH - Flexible Timber Hanger

The FTH hanger is an adaptable concept in top fix support, typically required in girder-girder connections where higher loads need to be transferred safely and economically.

FTH Datasheet

45L/R - Face Fixed 45° Hanger

The 45L/R timber to timber connector offers a pre-skewed 45º left or right hand orientation.

45L/R Datasheet

LR45 - 45° Hanger Left and Right

The LR45 hanger can accommodate both left and right 45º connections allowing for more flexibility on site and less stock holding.

LR45 Datasheet

VS - Variable Skewed Hanger

The VS hanger offers a superior level of performance to traditional joist hangers. The unique construction provides a variable skewed angle of between 30° and 90°.

VS Datasheet

VRC - Variable Ridge Connector

The VRC connects rafters to ridge beams. Its innovative design allows it to accommodate slopes between -35º and +45º and skews between 30º and 90º. It provides a positive load transfer.

VRC Datasheet

SA-45 - Skewed Angle 45°

The SA-45 provides qualified performance with an element of flexibility on-site. The angle is supplied pre-bent at 45º as shown and can be adjusted up to an angle of 135º as required. The SA must only be bent once.

SA-45 Datasheet